Our expert machinists fixture cylindrical and other shaped stock into a rotating chuck or collet on the lathe. As this chuck rotates the stock at a high RPM, a fixed-orientation tool then translates along and across the stock to cut part features. .
- Haas SL-20 Lathe
Turning Center- 2” Diameter Thru Spindle
- 8” Diameter Chuck
- 5C and S20 Collet Systems
- HAAS ST-10 Turning Center w/ Bar Feeder
- 6.5” Chuck
- 6000 RPM Capabilities
- Bar Feeder for large quantity automated production